Cre8tion Cordless E-File Nail Drill - Light Yellow
SKU: 13384
Regular price
$261.50
- Unit price
- / per
Find a Distributor
Cre8tion is sold through our distributors. Find one near you.
The Cre8tion Cordless E-File is a professional, rechargeable nail drill that runs up to 40,000 RPM without a cord in the way. It ships with a charging dock, so the control unit stays charged and ready on your station between clients
Why techs pick it
- Up to 40,000 RPM. The variable-speed dial runs from 1,000 to 40,000 RPM, low for natural nails and higher for removing product on enhancements.
- Cordless, with a 6000mAh battery. Work around the client without a power cord across the table.
- Charging dock in the box. Set the control unit in the dock to charge, or charge it with the included power adapter.
- Forward and reverse. One button for pause and direction, so it works for right-handed and left-handed techs.
- Takes standard 3/32 in bits. Use the bits you already own.
- Handpiece holder and clear shell. The handpiece has its own rest, and the clear shell protects the control unit.
Specifications
| Speed | 0 to 40,000 RPM, variable |
| Power | 60W |
| Battery | 6000mAh, rechargeable |
| Input voltage | 100 to 240V, 50/60Hz |
| Charger output | 5V / 2A |
| Bit size | Standard 3/32 in nail drill bits |
| Direction | Forward and reverse |
What is in the box
- Control unit
- Handpiece
- Charging dock (charger base)
- Power adapter
- Clear protective shell
- Handpiece holder
- Drill bits
- User manual
Good habits for a long life
- Charge fully before the first use, and do not use the drill while it is charging.
- Turn the power off before you change a bit, and push the bit all the way into the chuck.
- Start at a low speed and raise it gradually. Keep the bit moving and use light pressure.
- Wipe the handpiece and control unit with a dry or lightly damp cloth. Never rinse them under water.
Warranty and manual
Covered by a 3-month manufacturer warranty against defects. Keep your dated receipt. Read the full Cre8tion Cordless E-File user manual (PDF) before first use.
- Read the user manual before first use.
- Set the unit on a stable, dry surface and use only the charger, adapter, or cable that came with it.
- Follow the manual for timer, speed, or brightness settings.
- Switch off and unplug before cleaning. Let the unit cool, then wipe it with a lightly dampened cloth. Do not immerse it in water.
General guidance. Always follow the directions and warnings printed on the product label.
Keep the vents clear and the cord away from heat.
- Brand
- Cre8tion
- Type
- Nail Machines
- SKU
- 13384
Post
Share
Pin it
Adding product to your cart








